Steam Retort
  • Iran
  • |
  • Tehran
  • |
  • Tehran
  • Name : Farid Zarringhalam
  • Phone number : 00989125871844
  • Price(Dollar) :65,000
  • Address : No 14 - 3rd Golchin alley -South Golbarg St. - Emam zadeh st.-Qods city
  • Email:
Ad description

 Steam Retort (Autoclave)

All these significant benefits combined with reliability and manufacturing qualities widely recognized ensure a long product lifetime. If we were to sum up this product in two words, it would be simplicity and strength. This retort is reassuring by its consistency while being up-to-date thanks to its less-energy-consuming opposed to some of its competitors. 

How it operates:
Filled retort baskets are inserted into the Retort. The door is closed then locked automatically through a hydraulic/Pneumatic cylinder. It is mechanically blocked throughout the entire cycle.
Pre-heating of the enclosure is carried out by direct-steam-injection. Pre-heating temperature can be adjusted (e.g. 100°C – 0.2 bar) and air vent valve open. Adjustable period (e.g. 5 minutes).
Heating phase can be started. Heat is produced in the enclosure by direct-steam-injection. Dissemination will be made between each basket. Graduated acting steam valve opening is monitored by MPI until the set temperature is reached, for instance 121°C. Condensates are stored in the lower part of the enclosure.
Once the scheduled duration of the bearing comes to an end : pre-cooling starts.  It is performed by injecting cold water in the vessel via two lateral spray headers. This water accumulates at the lower section in addition to the condensates previously accumulated. The water level is controlled by a radar level and managed by MPI.
Once the set temperature is reached, final cooling is carried out by cascading recycled water on the load. 

Technical specifications:

Autoclave capacity varies according to the order of 1 to 4 baskets. Basket dimensions are 1 x 1 x 1 m. 

*We also have the capacity to adapt to your needs. Do not hesitate to contact us to discuss your specific requirements.


  • With a small number of mechanical parts, mechanical failure occurs less frequently. This advantage is seen as a significant maintenance cost saving.
  • Easy to use, learning time is reduced.
  • Great flexibility, fit to any packaging.
  • Packaging cooling is performed with sterile water.

Types of packaging or products:

  • Big pouches
  • Small pouches
  • Plastic trays
  • Cans / jars

Contact : or

Show my Info
Comments submitted by you will be published on the website after approval by the site administrator.